Piping

Valve Flow Coefficient (Cv) Explained: Understanding the Basics

Valve Flow Coefficient

Click to rate this post! [Total: 2 Average: 4.5]Valve Flow Coefficient (Cv) Explained: Understanding the Basics The Valve Flow Coefficient (Cv) is a critical parameter in fluid dynamics and is widely used in the design and selection of valves for various industrial applications. It represents the flow capacity of a valve and plays a key role in determining the efficiency …

Read More »

corrosion coupon installation

corrosion coupon installation

Click to rate this post! [Total: 3 Average: 4.7]How to install corrosion coupons and access fittings Installation of access fittings 1- Open the lid. 2- Loosen the plug with a suitable wrench and then remove it completely from the fitting with your hand. 3- The empty fitting should be installed on the pipe (for the welded type, it is welded …

Read More »

Corrosion monitoring design

corrosion monitoring design

Click to rate this post! [Total: 3 Average: 4.7]Corrosion monitoring design: It is very important to choose the best corrosion monitoring location for installing kerogen coupons and probes and installing corresponding corrosion connections to monitor the corrosion rate. When choosing the installation and monitoring location, you should pay attention to the following: 1- The highest amount of corrosion in pipelines …

Read More »

Installation and service guide for industrial valves

Installation and service guide for industrial valves

Click to rate this post! [Total: 2 Average: 4.5]Installation and service guide for industrial valves A valve is a device used to control the flow and pressure of fluids, the main functions of industrial valves are: Complete disconnection and connection of current Adjusting the flow of the required amount of fluids Preventing the return of passed fluids Adjusting and controlling …

Read More »

What are pipe flanges, types, dimension and how they work.

flanges

Click to rate this post! [Total: 3 Average: 4.7]What are pipe flanges and how do they work? Flanges are the second most used connection method after welding, providing a reliable way to connect piping systems to various equipment, valves and other components of almost any process system. The use of flanges increases flexibility when maintaining piping systems by allowing for …

Read More »

Introduction of types of valves – ball, gate, globe, plug, butterfly and applications

valve types

Click to rate this post! [Total: 4 Average: 4.8]Introduction of types of valves – ball, gate, globe, plug, butterfly valves and their applications in different industries Types of valves Ball Valve Ball valve¬† is a valve with a quarter turn. The closing part is a spherical plug with a through hole. When the valve is in the open position, the …

Read More »

This site is protected by wp-copyrightpro.com